dlinkap.local Login

Updated

dlinkap.local opens the settings of D-Link Wi-Fi extenders (DAP series). Before setup, the extender uses 192.168.0.50.

Contents
  1. How to log in to dlinkap.local
  2. dlinkap.local not working?
  3. Default D-Link logins
  4. Related
  5. Frequently asked questions
  6. Other login addresses

How to log in to dlinkap.local

  1. Connect your phone or computer to the D-Link range extenders and access points by Wi-Fi or a network cable. On a phone, turn off mobile data.
  2. Open a browser and type http://dlinkap.local in the address bar (not the search box).
  3. Enter the login: admin / (blank).
  4. Change the Wi-Fi name and password, update the firmware or check connected devices.

dlinkap.local not working?

  • dlinkap.local only works on the device’s own network. It is a local address, not a public website, so it will not load over mobile data or another Wi-Fi.
  • Use the IP address instead: 192.168.0.50. It works even when the name does not.
  • Type http://, not https://, and turn off VPN, Private DNS or Private Relay. They can stop local names from working.
  • Clear the browser cache or try a private window. Browsers sometimes remember a failed lookup.
  • Connect to the extender’s own Wi-Fi (dlink-xxxx) during setup.
  • Still stuck? Reset the device to restore the default address and password.
Router / ISPLogin addressUsernamePassword
DIR series192.168.0.1admin(blank)
DSL modem-routers192.168.1.1adminadmin
EAGLE PRO AI / newer DIR-Xdlinkrouter.localadminPrinted on the label

Frequently asked questions

What is dlinkap.local?

dlinkap.local opens the settings of D-Link Wi-Fi extenders (DAP series). Before setup, the extender uses 192.168.0.50.

What is the IP address of dlinkap.local?

dlinkap.local points to 192.168.0.50 on the device’s own network.

What is the default password for dlinkap.local?

admin / (blank). If it was changed and you do not know it, reset the device.

Other login addresses