Xiaomi Router Login

Updated

Every Xiaomi (Mi) router uses 192.168.31.1. There is no username — just the admin password you chose during setup.

Contents
  1. How to log in to a Xiaomi router
  2. Xiaomi default username and password
  3. Xiaomi default IP addresses
  4. Change your Wi-Fi name and password
  5. How to reset a Xiaomi router
  6. 192.168.31.1 not opening? Fixes that work
  7. Xiaomi models
  8. Frequently asked questions
  9. Other router brands

How to log in to a Xiaomi router

  1. Connect to the Xiaomi Wi-Fi network or plug in a LAN cable.
  2. Open a browser and go to miwifi.com or 192.168.31.1.
  3. Enter the username and password from the table below or from the router label.
  4. Use the menu to change Wi-Fi settings, see connected devices or update firmware.

Prefer your phone? The Mi Home / Xiaomi Home app does the same job and is often easier.

Xiaomi default username and password

Router / ISPLogin addressUsernamePassword
Mi Router 4 / 4A / 4C, AX seriesmiwifi.com—Set during setup (often the Wi-Fi password)

If the default login is rejected, the password was changed. The only way back in without it is a factory reset.

Xiaomi default IP addresses

Change your Wi-Fi name and password

  1. Log in at miwifi.com with the admin username and password.
  2. Open the Wireless (or WLAN / Wi-Fi) section.
  3. Change the SSID to set a new network name.
  4. Set security to WPA2-PSK or WPA3 and type a new password of at least 12 characters in the “Password”, “Pre-Shared Key” or “WPA Passphrase” box.
  5. Save or apply. Your devices will disconnect — reconnect them with the new password.

Need ideas for a strong password? See how to create a strong password.

How to reset a Xiaomi router

Hold the Reset button for 5 seconds until the system light turns yellow. The router restarts with the factory Wi-Fi name, password and admin login from the label. You will need to set up your internet connection again, so keep your ISP username and password handy.

More detail: how to reset your router.

192.168.31.1 not opening? Fixes that work

  • Connect to the router first. Use its Wi-Fi or a LAN cable — mobile data will never reach 192.168.31.1.
  • Type it in the address bar, not the search box, and include http:// — http://192.168.31.1. Many routers have no HTTPS page.
  • Check for typos: only numbers and dots. The letter “l” or “o” in place of 1 or 0 will not work.
  • Your router may use a different address. Check the default gateway (see above) or the label.
  • Turn off VPN, proxy or “Private Relay”. They send traffic outside your home network.
  • Try another browser or a private window, and clear the cache.
  • Restart the router: unplug it for 30 seconds, then wait two minutes after plugging it back in.
  • Still stuck? A factory reset restores the default address and password.

Xiaomi models

Login details for individual models, each checked against Xiaomi’s own documentation.

ModelLogin addressUsernamePasswordSource
Mi Router 4A Gigabit Editionrouter.miwifi.com or 192.168.31.1—You set it at setupOfficial doc
Router AX3000Trouter.miwifi.com or 192.168.31.1—You set it at setupOfficial doc

Frequently asked questions

What is the default IP for Xiaomi routers?

Xiaomi routers use 192.168.31.1 — or type miwifi.com in your browser.

What is the default Xiaomi router password?

Newer models often use a unique password printed on the label.

How do I reset my Xiaomi router?

Hold the Reset button for 5 seconds until the system light turns yellow.

Other router brands