Ubiquiti (UniFi / EdgeRouter) Router Login

Updated

Ubiquiti EdgeRouters use 192.168.1.1 with ubnt / ubnt. UniFi Dream Machines and routers use 192.168.1.1 but are set up with the UniFi app or at unifi.ui.com; AmpliFi uses the AmpliFi app.

Contents
  1. How to log in to a Ubiquiti (UniFi / EdgeRouter) router
  2. Ubiquiti (UniFi / EdgeRouter) default username and password
  3. Ubiquiti (UniFi / EdgeRouter) default IP addresses
  4. Change your Wi-Fi name and password
  5. How to reset a Ubiquiti (UniFi / EdgeRouter) router
  6. 192.168.1.1 not opening? Fixes that work
  7. Frequently asked questions
  8. Other router brands

How to log in to a Ubiquiti (UniFi / EdgeRouter) router

  1. Connect to the Ubiquiti (UniFi / EdgeRouter) Wi-Fi network or plug in a LAN cable.
  2. Open a browser and go to 192.168.1.1.
  3. Enter the username and password from the table below or from the router label.
  4. Use the menu to change Wi-Fi settings, see connected devices or update firmware.

Prefer your phone? The UniFi mobile app does the same job and is often easier.

Ubiquiti (UniFi / EdgeRouter) default username and password

Router / ISPLogin addressUsernamePasswordSource
AmpliFi Alienamplifi.lan—No web login — use the appOfficial doc
AmpliFi HDamplifi.lan—No web login — use the appOfficial doc
EdgeRouter 12192.168.1.1ubntubntOfficial doc
EdgeRouter 4 (ER-4)192.168.1.1ubntubntOfficial doc
EdgeRouter 6P (ER-6P)192.168.1.1ubntubntOfficial doc
EdgeRouter Infinity (ER-8-XG)192.168.1.1ubntubntOfficial doc
EdgeRouter Lite (ER-3)192.168.1.1ubntubntOfficial doc
EdgeRouter X (ER-X)192.168.1.1ubntubntOfficial doc
UniFi Dream Machine (UDM)unifi.ui.com or 192.168.1.1—Created by you during setupOfficial doc
UniFi Dream Machine Pro (UDM-Pro)unifi.ui.com or 192.168.1.1—Created by you during setupOfficial doc
UniFi Dream Machine SE (UDM-SE)unifi.ui.com or 192.168.1.1—Created by you during setupOfficial doc
UniFi Dream Router (UDR)setup.ui.com or 192.168.1.1—No web login — use the appOfficial doc
UniFi U6 Lite Access PointApp only—No web login — use the appOfficial doc

“Official doc” rows link to the manufacturer’s or ISP’s own documentation, via the ssid.ai router dataset (CC BY 4.0).

If the default login is rejected, the password was changed. The only way back in without it is a factory reset.

Ubiquiti (UniFi / EdgeRouter) default IP addresses

Change your Wi-Fi name and password

  1. Log in at 192.168.1.1 with the admin username and password.
  2. Open the Wireless (or WLAN / Wi-Fi) section.
  3. Change the SSID to set a new network name.
  4. Set security to WPA2-PSK or WPA3 and type a new password of at least 12 characters in the “Password”, “Pre-Shared Key” or “WPA Passphrase” box.
  5. Save or apply. Your devices will disconnect — reconnect them with the new password.

Need ideas for a strong password? See how to create a strong password.

How to reset a Ubiquiti (UniFi / EdgeRouter) router

Hold the reset button for about 10 seconds until the LED changes, then set the device up again. The router restarts with the factory Wi-Fi name, password and admin login from the label. You will need to set up your internet connection again, so keep your ISP username and password handy.

More detail: how to reset your router.

192.168.1.1 not opening? Fixes that work

  • Connect to the router first. Use its Wi-Fi or a LAN cable — mobile data will never reach 192.168.1.1.
  • Type it in the address bar, not the search box, and include http:// — http://192.168.1.1. Many routers have no HTTPS page.
  • Check for typos: only numbers and dots. The letter “l” or “o” in place of 1 or 0 will not work.
  • Your router may use a different address. Check the default gateway (see above) or the label.
  • Turn off VPN, proxy or “Private Relay”. They send traffic outside your home network.
  • Try another browser or a private window, and clear the cache.
  • Restart the router: unplug it for 30 seconds, then wait two minutes after plugging it back in.
  • Still stuck? A factory reset restores the default address and password.

Frequently asked questions

What is the default IP for Ubiquiti (UniFi / EdgeRouter) routers?

Ubiquiti (UniFi / EdgeRouter) routers use 192.168.1.1.

What is the default Ubiquiti (UniFi / EdgeRouter) router password?

Newer models often use a unique password printed on the label.

How do I reset my Ubiquiti (UniFi / EdgeRouter) router?

Hold the reset button for about 10 seconds until the LED changes, then set the device up again.

Other router brands