NetComm (Aussie Broadband) NF20MESH Login

Updated

The NetComm (Aussie Broadband) NF20MESH is a modem-router (gateway) whose admin page answers on 192.168.20.1. Each unit has its own admin password printed on the device label — there is no shared default.

Contents
  1. NetComm (Aussie Broadband) NF20MESH default login
  2. How to log in to the NetComm (Aussie Broadband) NF20MESH
  3. If the login does not work
  4. More help
  5. Frequently asked questions

NetComm (Aussie Broadband) NF20MESH default login

ModelLogin addressUsernamePasswordSource
NF20MESH192.168.20.1adminOn the label (unique)Official doc

Checked against Aussie Broadband Help Centre — How to set up your Netcomm NF20MESH on 31 Aug 2026 (high confidence), via the ssid.ai dataset (CC BY 4.0).

“Aussie Broadband's standard-issue NBN modem/router.”

How to log in to the NetComm (Aussie Broadband) NF20MESH

  1. Connect to the NetComm (Aussie Broadband) NF20MESH by Wi-Fi or a network cable. On a phone, turn off mobile data.
  2. Open a browser and go to 192.168.20.1.
  3. Sign in with admin / On the label (unique).
  4. Open the Wireless or Wi-Fi section to change the network name and password.

If the login does not work

  • Check the label first. This model has a unique password printed on the device — admin / admin will not work.
  • Someone may have changed it. A factory reset restores the login above.
  • Reset: Hold the reset button for about 10 seconds.
  • Wrong address? Check your default gateway — see how to find your router’s IP.
  • Type http://, not https://, and turn off any VPN or Private DNS.

More help

Frequently asked questions

What is the default password for the NetComm (Aussie Broadband) NF20MESH?

Username admin, password On the label (unique).

What is the NetComm (Aussie Broadband) NF20MESH IP address?

The admin page is at 192.168.20.1.

How do I reset the NetComm (Aussie Broadband) NF20MESH?

Hold the reset button for about 10 seconds.