Rogers Router Login
Rogers Ignite WiFi Gateways open at 10.0.0.1 with the username admin and the password on the label. Older Rogers Hitron CODA modems use 192.168.0.1 with cusadmin / password.
Ignite WiFi Gateway (XB6/XB7/XB8): admin / Printed on the label
Rogers Ignite — Hitron CODA modem (CODA-4582/4680): Cusadmin / password
Contents
How to log in to the Rogers router
- Connect to your Rogers Wi-Fi (or plug in a LAN cable).
- Open a browser and go to 10.0.0.1 or 192.168.0.1.
- Enter the username and password below. If they fail, use the ones on the router label.
- Open the Wi-Fi / WLAN menu to change your network name and password.
Rogers default username and password
| Router / ISP | Login address | Username | Password | Source |
|---|---|---|---|---|
| Ignite WiFi Gateway (XB6/XB7/XB8) | 10.0.0.1 | admin | Printed on the label | Official doc |
| Rogers Ignite — Hitron CODA modem (CODA-4582/4680) | 192.168.0.1 | Cusadmin | password | Official doc |
“Official doc” rows link to the manufacturer’s or ISP’s own documentation, via the ssid.ai router dataset (CC BY 4.0).
Credentials vary by model and installation date. The sticker on your router always wins.
Change the Rogers Wi-Fi password
After logging in: Gateway → Connection → Wi-Fi → Edit → Save.
Use at least 12 characters. Every device will need the new password to reconnect.
10.0.0.1 not opening? Fixes that work
- Connect to the router first. Use its Wi-Fi or a LAN cable — mobile data will never reach 10.0.0.1.
- Type it in the address bar, not the search box, and include
http://—http://10.0.0.1. Many routers have no HTTPS page. - Check for typos: only numbers and dots. The letter “l” or “o” in place of 1 or 0 will not work.
- Your router may use a different address. Check the default gateway (see above) or the label.
- Turn off VPN, proxy or “Private Relay”. They send traffic outside your home network.
- Try another browser or a private window, and clear the cache.
- Restart the router: unplug it for 30 seconds, then wait two minutes after plugging it back in.
- Still stuck? A factory reset restores the default address and password.
Still need help?
If the login page will not open or the password is refused, contact Rogers support: Ignite HomeConnect app. A factory reset also works, but on ISP routers it can remove your internet settings — ask your provider first.
Frequently asked questions
What is the Rogers router IP address?
Rogers routers use 10.0.0.1 or 192.168.0.1.
What is the default Rogers router password?
Ignite WiFi Gateway (XB6/XB7/XB8): admin / Printed on the label. If it does not work, check the router label.
How do I change my Rogers Wi-Fi password?
Gateway → Connection → Wi-Fi → Edit → Save.