PLDT Home Fiber Router Login
PLDT Home Fiber modems (Huawei, ZTE, Fiberhome) open at 192.168.1.1, PLDT Ultera at 192.168.15.1, and older PLDT DSL modems at 192.168.254.254. The “adminpldt” super-admin account is locked by PLDT on current firmware, so use the login on your label.
PLDT fibre modem: admin / Printed on the label (older units: 1234)
PLDT Ultera (LTE): admin / Printed on the label
Contents
How to log in to the PLDT Home Fiber router
- Connect to your PLDT Home Fiber Wi-Fi (or plug in a LAN cable).
- Open a browser and go to 192.168.1.1 or 192.168.15.1 or 192.168.254.254.
- Enter the username and password below. If they fail, use the ones on the router label.
- Open the Wi-Fi / WLAN menu to change your network name and password.
PLDT Home Fiber default username and password
| Router / ISP | Login address | Username | Password |
|---|---|---|---|
| PLDT fibre modem | 192.168.1.1 | admin | Printed on the label (older units: 1234) |
| PLDT Ultera (LTE) | 192.168.15.1 | admin | Printed on the label |
| Older PLDT DSL modem | 192.168.254.254 | admin | 1234 (or printed on the label) |
Credentials vary by model and installation date. The sticker on your router always wins.
Change the PLDT Home Fiber Wi-Fi password
After logging in: WLAN → WLAN Basic Configuration → change SSID and WPA pre-shared key → Apply.
Use at least 12 characters. Every device will need the new password to reconnect.
192.168.1.1 not opening? Fixes that work
- Connect to the router first. Use its Wi-Fi or a LAN cable — mobile data will never reach 192.168.1.1.
- Type it in the address bar, not the search box, and include
http://—http://192.168.1.1. Many routers have no HTTPS page. - Check for typos: only numbers and dots. The letter “l” or “o” in place of 1 or 0 will not work.
- Your router may use a different address. Check the default gateway (see above) or the label.
- Turn off VPN, proxy or “Private Relay”. They send traffic outside your home network.
- Try another browser or a private window, and clear the cache.
- Restart the router: unplug it for 30 seconds, then wait two minutes after plugging it back in.
- Still stuck? A factory reset restores the default address and password.
Router brands used by PLDT Home Fiber
Still need help?
If the login page will not open or the password is refused, contact PLDT Home Fiber support: PLDT Home app or 171. A factory reset also works, but on ISP routers it can remove your internet settings — ask your provider first.
Frequently asked questions
What is the PLDT Home Fiber router IP address?
PLDT Home Fiber routers use 192.168.1.1 or 192.168.254.254 or 192.168.15.1.
What is the default PLDT Home Fiber router password?
PLDT fibre modem: admin / Printed on the label (older units: 1234). If it does not work, check the router label.
How do I change my PLDT Home Fiber Wi-Fi password?
WLAN → WLAN Basic Configuration → change SSID and WPA pre-shared key → Apply.