Converge ICT Router Login
Converge FiberX modems use 192.168.1.1. The user-level password is on the label under the modem.
Converge fibre modem (ZTE / FiberHome): user / Printed on the label
Converge ZTE F670L admin account (older firmware): admin / Converge@zte123
Contents
How to log in to the Converge ICT router
- Connect to your Converge ICT Wi-Fi (or plug in a LAN cable).
- Open a browser and go to 192.168.1.1 or 192.168.1.1.
- Enter the username and password below. If they fail, use the ones on the router label.
- Open the Wi-Fi / WLAN menu to change your network name and password.
Converge ICT default username and password
| Router / ISP | Login address | Username | Password |
|---|---|---|---|
| Converge fibre modem (ZTE / FiberHome) | 192.168.1.1 | user | Printed on the label |
| Converge ZTE F670L admin account (older firmware) | 192.168.1.1 | admin | Converge@zte123 |
Credentials vary by model and installation date. The sticker on your router always wins.
Change the Converge ICT Wi-Fi password
After logging in: Network → WLAN → SSID Settings / Security → Submit.
Use at least 12 characters. Every device will need the new password to reconnect.
192.168.1.1 not opening? Fixes that work
- Connect to the router first. Use its Wi-Fi or a LAN cable — mobile data will never reach 192.168.1.1.
- Type it in the address bar, not the search box, and include
http://—http://192.168.1.1. Many routers have no HTTPS page. - Check for typos: only numbers and dots. The letter “l” or “o” in place of 1 or 0 will not work.
- Your router may use a different address. Check the default gateway (see above) or the label.
- Turn off VPN, proxy or “Private Relay”. They send traffic outside your home network.
- Try another browser or a private window, and clear the cache.
- Restart the router: unplug it for 30 seconds, then wait two minutes after plugging it back in.
- Still stuck? A factory reset restores the default address and password.
Router brands used by Converge ICT
Still need help?
If the login page will not open or the password is refused, contact Converge ICT support: Converge app. A factory reset also works, but on ISP routers it can remove your internet settings — ask your provider first.
Frequently asked questions
What is the Converge ICT router IP address?
Converge ICT routers use 192.168.1.1.
What is the default Converge ICT router password?
Converge fibre modem (ZTE / FiberHome): user / Printed on the label. If it does not work, check the router label.
How do I change my Converge ICT Wi-Fi password?
Network → WLAN → SSID Settings / Security → Submit.