Keenetic Router Login

Updated

Keenetic routers open at my.keenetic.net (192.168.1.1). The username is admin; you create the password in the setup wizard.

Contents
  1. How to log in to a Keenetic router
  2. Keenetic default username and password
  3. Keenetic default IP addresses
  4. Change your Wi-Fi name and password
  5. How to reset a Keenetic router
  6. 192.168.1.1 not opening? Fixes that work
  7. Frequently asked questions
  8. Other router brands

How to log in to a Keenetic router

  1. Connect to the Keenetic Wi-Fi network or plug in a LAN cable.
  2. Open a browser and go to my.keenetic.net or 192.168.1.1.
  3. Enter the username and password from the table below or from the router label.
  4. Use the menu to change Wi-Fi settings, see connected devices or update firmware.

Prefer your phone? The Keenetic app does the same job and is often easier.

Keenetic default username and password

Router / ISPLogin addressUsernamePasswordSource
Keenetic Giga (KN-1011)my.keenetic.net or 192.168.1.1adminCreated by you during setupOfficial doc
Keenetic Hopper (KN-3811)my.keenetic.net or 192.168.1.1adminCreated by you during setupOfficial doc
Keenetic Peak (KN-2710)my.keenetic.net or 192.168.1.1adminCreated by you during setupOfficial doc
Keenetic Titan (KN-1812)my.keenetic.net or 192.168.1.1adminCreated by you during setupOfficial doc
Keenetic Viva (KN-1912)my.keenetic.net or 192.168.1.1adminCreated by you during setupOfficial doc
Sprinter (KN-3710)my.keenetic.net or 192.168.1.1adminCreated by you during setupOfficial doc

“Official doc” rows link to the manufacturer’s or ISP’s own documentation, via the ssid.ai router dataset (CC BY 4.0).

If the default login is rejected, the password was changed. The only way back in without it is a factory reset.

Keenetic default IP addresses

Change your Wi-Fi name and password

  1. Log in at my.keenetic.net with the admin username and password.
  2. Open the Wireless (or WLAN / Wi-Fi) section.
  3. Change the SSID to set a new network name.
  4. Set security to WPA2-PSK or WPA3 and type a new password of at least 12 characters in the “Password”, “Pre-Shared Key” or “WPA Passphrase” box.
  5. Save or apply. Your devices will disconnect — reconnect them with the new password.

Need ideas for a strong password? See how to create a strong password.

How to reset a Keenetic router

Hold the Reset button for about 10 seconds until the status light blinks. The router restarts with the factory Wi-Fi name, password and admin login from the label. You will need to set up your internet connection again, so keep your ISP username and password handy.

More detail: how to reset your router.

192.168.1.1 not opening? Fixes that work

  • Connect to the router first. Use its Wi-Fi or a LAN cable — mobile data will never reach 192.168.1.1.
  • Type it in the address bar, not the search box, and include http:// — http://192.168.1.1. Many routers have no HTTPS page.
  • Check for typos: only numbers and dots. The letter “l” or “o” in place of 1 or 0 will not work.
  • Your router may use a different address. Check the default gateway (see above) or the label.
  • Turn off VPN, proxy or “Private Relay”. They send traffic outside your home network.
  • Try another browser or a private window, and clear the cache.
  • Restart the router: unplug it for 30 seconds, then wait two minutes after plugging it back in.
  • Still stuck? A factory reset restores the default address and password.

Frequently asked questions

What is the default IP for Keenetic routers?

Keenetic routers use 192.168.1.1 — or type my.keenetic.net in your browser.

What is the default Keenetic router password?

For Keenetic Giga (KN-1011) it is admin / Created by you during setup. Newer models often use a unique password printed on the label.

How do I reset my Keenetic router?

Hold the Reset button for about 10 seconds until the status light blinks.

Other router brands