Starlink Router Login

Updated

Starlink has no traditional admin panel. The router lives at 192.168.1.1, the dish at 192.168.100.1, but nearly every setting is changed in the Starlink app.

Contents
  1. How to log in to a Starlink router
  2. Starlink default username and password
  3. Starlink default IP addresses
  4. Change your Wi-Fi name and password
  5. How to reset a Starlink router
  6. 192.168.1.1 not opening? Fixes that work
  7. Frequently asked questions
  8. Other router brands
  1. Connect to the Starlink Wi-Fi network or plug in a LAN cable.
  2. Open a browser and go to dishy.starlink.com or 192.168.1.1 or 192.168.100.1.
  3. Enter the username and password from the table below or from the router label.
  4. Use the menu to change Wi-Fi settings, see connected devices or update firmware.

Prefer your phone? The Starlink app (required for most settings) does the same job and is often easier.

Router / ISPLogin addressUsernamePassword
Router192.168.1.1—No web login — use the Starlink app
Dish statistics192.168.100.1—No password (read-only)

If the default login is rejected, the password was changed. The only way back in without it is a factory reset.

Change your Wi-Fi name and password

  1. Log in at dishy.starlink.com with the admin username and password.
  2. Open the Wireless (or WLAN / Wi-Fi) section.
  3. Change the SSID to set a new network name.
  4. Set security to WPA2-PSK or WPA3 and type a new password of at least 12 characters in the “Password”, “Pre-Shared Key” or “WPA Passphrase” box.
  5. Save or apply. Your devices will disconnect — reconnect them with the new password.

Need ideas for a strong password? See how to create a strong password.

Power-cycle the router 3 times (off 2 s, on 2 s) or use the app; Gen 3 routers reset from the app. The router restarts with the factory Wi-Fi name, password and admin login from the label. You will need to set up your internet connection again, so keep your ISP username and password handy.

More detail: how to reset your router.

192.168.1.1 not opening? Fixes that work

  • Connect to the router first. Use its Wi-Fi or a LAN cable — mobile data will never reach 192.168.1.1.
  • Type it in the address bar, not the search box, and include http:// — http://192.168.1.1. Many routers have no HTTPS page.
  • Check for typos: only numbers and dots. The letter “l” or “o” in place of 1 or 0 will not work.
  • Your router may use a different address. Check the default gateway (see above) or the label.
  • Turn off VPN, proxy or “Private Relay”. They send traffic outside your home network.
  • Try another browser or a private window, and clear the cache.
  • Restart the router: unplug it for 30 seconds, then wait two minutes after plugging it back in.
  • Still stuck? A factory reset restores the default address and password.

Frequently asked questions

What is the default IP for Starlink routers?

Starlink routers use 192.168.1.1, 192.168.100.1 — or type dishy.starlink.com in your browser.

What is the default Starlink router password?

Newer models often use a unique password printed on the label.

How do I reset my Starlink router?

Power-cycle the router 3 times (off 2 s, on 2 s) or use the app; Gen 3 routers reset from the app.

Other router brands