Ruckus Router Login

Updated

Ruckus access points in Unleashed mode are reached at unleashed.ruckuswireless.com or 192.168.0.1. Standalone units use super / sp-admin.

Contents
  1. How to log in to a Ruckus router
  2. Ruckus default username and password
  3. Ruckus default IP addresses
  4. Change your Wi-Fi name and password
  5. How to reset a Ruckus router
  6. 192.168.0.1 not opening? Fixes that work
  7. Ruckus models
  8. Frequently asked questions
  9. Other router brands

How to log in to a Ruckus router

  1. Connect to the Ruckus Wi-Fi network or plug in a LAN cable.
  2. Open a browser and go to unleashed.ruckuswireless.com or 192.168.0.1.
  3. Enter the username and password from the table below or from the router label.
  4. Use the menu to change Wi-Fi settings, see connected devices or update firmware.

Prefer your phone? The Ruckus Unleashed app does the same job and is often easier.

Ruckus default username and password

Router / ISPLogin addressUsernamePasswordSource
R350App onlysupersp-adminOfficial doc
R550 (Unleashed mode)unleashed.ruckuswireless.com or 192.168.0.1—Created by you during setupOfficial doc

“Official doc” rows link to the manufacturer’s or ISP’s own documentation, via the ssid.ai router dataset (CC BY 4.0).

If the default login is rejected, the password was changed. The only way back in without it is a factory reset.

Ruckus default IP addresses

Change your Wi-Fi name and password

  1. Log in at unleashed.ruckuswireless.com with the admin username and password.
  2. Open the Wireless (or WLAN / Wi-Fi) section.
  3. Change the SSID to set a new network name.
  4. Set security to WPA2-PSK or WPA3 and type a new password of at least 12 characters in the “Password”, “Pre-Shared Key” or “WPA Passphrase” box.
  5. Save or apply. Your devices will disconnect — reconnect them with the new password.

Need ideas for a strong password? See how to create a strong password.

How to reset a Ruckus router

Hold the reset button for about 8 seconds. The router restarts with the factory Wi-Fi name, password and admin login from the label. You will need to set up your internet connection again, so keep your ISP username and password handy.

More detail: how to reset your router.

192.168.0.1 not opening? Fixes that work

  • Connect to the router first. Use its Wi-Fi or a LAN cable — mobile data will never reach 192.168.0.1.
  • Type it in the address bar, not the search box, and include http:// — http://192.168.0.1. Many routers have no HTTPS page.
  • Check for typos: only numbers and dots. The letter “l” or “o” in place of 1 or 0 will not work.
  • Your router may use a different address. Check the default gateway (see above) or the label.
  • Turn off VPN, proxy or “Private Relay”. They send traffic outside your home network.
  • Try another browser or a private window, and clear the cache.
  • Restart the router: unplug it for 30 seconds, then wait two minutes after plugging it back in.
  • Still stuck? A factory reset restores the default address and password.

Ruckus models

Login details for individual models, each checked against Ruckus’s own documentation.

ModelLogin addressUsernamePasswordSource
R350App onlysupersp-adminOfficial doc
R550 (Unleashed mode)unleashed.ruckuswireless.com or 192.168.0.1—You set it at setupOfficial doc

Frequently asked questions

What is the default IP for Ruckus routers?

Ruckus routers use 192.168.0.1 — or type unleashed.ruckuswireless.com in your browser.

What is the default Ruckus router password?

For R350 it is super / sp-admin. Newer models often use a unique password printed on the label.

How do I reset my Ruckus router?

Hold the reset button for about 8 seconds.

Other router brands