Prolink Router Login

Updated

Prolink routers, including the Hurricane models shipped by Globe At Home, use 192.168.1.254 with admin / admin.

Contents
  1. How to log in to a Prolink router
  2. Prolink default username and password
  3. Prolink default IP addresses
  4. Change your Wi-Fi name and password
  5. How to reset a Prolink router
  6. 192.168.1.254 not opening? Fixes that work
  7. Prolink models
  8. Frequently asked questions
  9. Other router brands
  1. Connect to the Prolink Wi-Fi network or plug in a LAN cable.
  2. Open a browser and go to 192.168.1.254.
  3. Enter the username and password from the table below or from the router label.
  4. Use the menu to change Wi-Fi settings, see connected devices or update firmware.
Router / ISPLogin addressUsernamePasswordSource
Hurricane 6300G (Globe At Home)192.168.1.254adminadminOfficial doc

“Official doc” rows link to the manufacturer’s or ISP’s own documentation, via the ssid.ai router dataset (CC BY 4.0).

If the default login is rejected, the password was changed. The only way back in without it is a factory reset.

Change your Wi-Fi name and password

  1. Log in at 192.168.1.254 with the admin username and password.
  2. Open the Wireless (or WLAN / Wi-Fi) section.
  3. Change the SSID to set a new network name.
  4. Set security to WPA2-PSK or WPA3 and type a new password of at least 12 characters in the “Password”, “Pre-Shared Key” or “WPA Passphrase” box.
  5. Save or apply. Your devices will disconnect — reconnect them with the new password.

Need ideas for a strong password? See how to create a strong password.

Hold the reset button for about 10 seconds. The router restarts with the factory Wi-Fi name, password and admin login from the label. You will need to set up your internet connection again, so keep your ISP username and password handy.

More detail: how to reset your router.

192.168.1.254 not opening? Fixes that work

  • Connect to the router first. Use its Wi-Fi or a LAN cable — mobile data will never reach 192.168.1.254.
  • Type it in the address bar, not the search box, and include http:// — http://192.168.1.254. Many routers have no HTTPS page.
  • Check for typos: only numbers and dots. The letter “l” or “o” in place of 1 or 0 will not work.
  • Your router may use a different address. Check the default gateway (see above) or the label.
  • Turn off VPN, proxy or “Private Relay”. They send traffic outside your home network.
  • Try another browser or a private window, and clear the cache.
  • Restart the router: unplug it for 30 seconds, then wait two minutes after plugging it back in.
  • Still stuck? A factory reset restores the default address and password.

Login details for individual models, each checked against Prolink’s own documentation.

ModelLogin addressUsernamePasswordSource
Hurricane 6300G (Globe At Home)192.168.1.254adminadminOfficial doc

Frequently asked questions

What is the default IP for Prolink routers?

Prolink routers use 192.168.1.254.

What is the default Prolink router password?

For Hurricane 6300G (Globe At Home) it is admin / admin. Newer models often use a unique password printed on the label.

How do I reset my Prolink router?

Hold the reset button for about 10 seconds.

Other router brands