On this page
Netis routers open at netis.cc (192.168.1.1) and have no login password until you set one.
How to log in to a Netis router
- Connect to the Netis Wi-Fi network or plug in a LAN cable.
- Open a browser and go to netis.cc or 192.168.1.1.
- Enter the username and password from the table below or from the router label.
- Use the menu to change Wi-Fi settings, see connected devices or update firmware.
Netis default username and password
| Router / ISP | Login address | Username | Password |
|---|---|---|---|
| WF series | netis.cc | — | No password by default |
If the default login is rejected, the password was changed. The only way back in without it is a factory reset.
Netis default IP addresses
- 192.168.1.1
- netis.cc
Change your Wi-Fi name and password
- Log in at netis.cc with the admin username and password.
- Open the Wireless (or WLAN / Wi-Fi) section.
- Change the SSID to set a new network name.
- Set security to WPA2-PSK or WPA3 and type a new password of at least 12 characters in the “Password”, “Pre-Shared Key” or “WPA Passphrase” box.
- Save or apply. Your devices will disconnect — reconnect them with the new password.
Need ideas for a strong password? See how to create a strong password.
How to reset a Netis router
Hold the Default button for 5–8 seconds. The router restarts with the factory Wi-Fi name, password and admin login from the label. You will need to set up your internet connection again, so keep your ISP username and password handy.
More detail: how to reset your router.
192.168.1.1 not opening? Fixes that work
- Connect to the router first. Use its Wi-Fi or a LAN cable — mobile data will never reach 192.168.1.1.
- Type it in the address bar, not the search box, and include
http://—http://192.168.1.1. Many routers have no HTTPS page. - Check for typos: only numbers and dots. The letter “l” or “o” in place of 1 or 0 will not work.
- Your router may use a different address. Check the default gateway (see above) or the label.
- Turn off VPN, proxy or “Private Relay”. They send traffic outside your home network.
- Try another browser or a private window, and clear the cache.
- Restart the router: unplug it for 30 seconds, then wait two minutes after plugging it back in.
- Still stuck? A factory reset restores the default address and password.
Frequently asked questions
What is the default IP for Netis routers?
Netis routers use 192.168.1.1 — or type netis.cc in your browser.
What is the default Netis router password?
Newer models often use a unique password printed on the label.
How do I reset my Netis router?
Hold the Default button for 5–8 seconds.
Other router brands
- TP-Linktplinkwifi.net · 192.168.0.1 · 192.168.1.1 · 192.168.68.1
- Netgearrouterlogin.net · 192.168.1.1 · 192.168.0.1 · 192.168.100.1
- Linksysmyrouter.local · 192.168.1.1
- D-Linkdlinkrouter.local · 192.168.0.1 · 192.168.1.1
- ASUSrouter.asus.com · 192.168.50.1 · 192.168.1.1
- Tendatendawifi.com · 192.168.0.1
- Huawei192.168.3.1 · 192.168.8.1 · 192.168.100.1 · 192.168.1.1
- ZTE192.168.1.1 · 192.168.0.1