DrayTek Router Login

Updated

DrayTek Vigor routers open at 192.168.1.1 with admin / admin, and VigorAP access points at 192.168.1.2. Change the password right after the first login.

Contents
  1. How to log in to a DrayTek router
  2. DrayTek default username and password
  3. DrayTek default IP addresses
  4. Change your Wi-Fi name and password
  5. How to reset a DrayTek router
  6. 192.168.1.1 not opening? Fixes that work
  7. Frequently asked questions
  8. Other router brands

How to log in to a DrayTek router

  1. Connect to the DrayTek Wi-Fi network or plug in a LAN cable.
  2. Open a browser and go to vigorap.com or 192.168.1.1 or 192.168.1.2.
  3. Enter the username and password from the table below or from the router label.
  4. Use the menu to change Wi-Fi settings, see connected devices or update firmware.

DrayTek default username and password

Router / ISPLogin addressUsernamePasswordSource
Vigor2135192.168.1.1adminadminOfficial doc
Vigor2765192.168.1.1adminadminOfficial doc
Vigor2865192.168.1.1adminadminOfficial doc
Vigor2927192.168.1.1adminadminOfficial doc
Vigor3910192.168.1.1adminadminOfficial doc
VigorAP 903vigorap.com or 192.168.1.2adminadminOfficial doc

“Official doc” rows link to the manufacturer’s or ISP’s own documentation, via the ssid.ai router dataset (CC BY 4.0).

If the default login is rejected, the password was changed. The only way back in without it is a factory reset.

DrayTek default IP addresses

Change your Wi-Fi name and password

  1. Log in at vigorap.com with the admin username and password.
  2. Open the Wireless (or WLAN / Wi-Fi) section.
  3. Change the SSID to set a new network name.
  4. Set security to WPA2-PSK or WPA3 and type a new password of at least 12 characters in the “Password”, “Pre-Shared Key” or “WPA Passphrase” box.
  5. Save or apply. Your devices will disconnect — reconnect them with the new password.

Need ideas for a strong password? See how to create a strong password.

How to reset a DrayTek router

Hold the Factory Reset button for about 5 seconds while the router is on. The router restarts with the factory Wi-Fi name, password and admin login from the label. You will need to set up your internet connection again, so keep your ISP username and password handy.

More detail: how to reset your router.

192.168.1.1 not opening? Fixes that work

  • Connect to the router first. Use its Wi-Fi or a LAN cable — mobile data will never reach 192.168.1.1.
  • Type it in the address bar, not the search box, and include http:// — http://192.168.1.1. Many routers have no HTTPS page.
  • Check for typos: only numbers and dots. The letter “l” or “o” in place of 1 or 0 will not work.
  • Your router may use a different address. Check the default gateway (see above) or the label.
  • Turn off VPN, proxy or “Private Relay”. They send traffic outside your home network.
  • Try another browser or a private window, and clear the cache.
  • Restart the router: unplug it for 30 seconds, then wait two minutes after plugging it back in.
  • Still stuck? A factory reset restores the default address and password.

Frequently asked questions

What is the default IP for DrayTek routers?

DrayTek routers use 192.168.1.1, 192.168.1.2 — or type vigorap.com in your browser.

What is the default DrayTek router password?

For Vigor2135 it is admin / admin. Newer models often use a unique password printed on the label.

How do I reset my DrayTek router?

Hold the Factory Reset button for about 5 seconds while the router is on.

Other router brands